Description
MAF Seal for Aftermarket Cold Air Intake CAI
Our MAF Seal is made for aftermarket Cold Air Intake (CAI),. These will seal your MAF 100%. Because, you might be experiencing a check engine light (CEL) caused from the MAF not sealing all the way. This seal prevents any unmetered air entering in the engine air intake causing lean conditions. You may be experiencing the following fault codes:
- P0171 – System Too Lean (Bank 1)
- P0174 – System Too Lean (Bank 2)
- P0101, P0102, P0103, & P0104 – MAF circuit issues
- 118001 Mixture Control: Fuel-Air Mixture Too Lean
- 118401 Mixture Control: Mixture Too Lean, Deviation Too High
- 21A02D Combustion Control: Idle Irregular
- Any fault codes that relate to lean conditions, Idle or Mass Air Flow Sensor (MAF)
MAF Seal Fitment
This fits all vehicles that have the same bolt in configuration of Hitachi MAF shown in the photo below:
The contact patch may be slightly different, However, the only thing that matters is the hole locations and the size of the center hole.
These fit Hitachi MAF Patterns for the following vehicles:
- BMW: B58, N54, N55 and many other MAFs with the same pattern.
- VAG: VW, Volkswagen & Audi 2.0T FSI / TSI, GTI, Golf, Jetta, GLI – 06J-906-461-D / 06J906461 D / 06J 906 461 D / 06J906461D, 3.0L V6 TDi / A6, A7 Quattro / Q5 / Q7 / Touareg | 059906461N, 2.0T TSi / Mk5 / Mk6 | 06J906461B, 2.0T A4 / A5 / A6 / A4, A5 A6, Quattro / Q3 / Q5 / Allroad | 06J906461D-HIT
- GM / Chevy: LS3, LS7, Corvette, Z06, Camaro, ZL1, CTS-V, CT6, ATS, Silverado, & GMC Sierra.
- Nissan: 350Z (03-06), Altima (04-07), Maxima (04-08), Murano (03-07), NV350 Urvan (17-19), Pathfinder (03-04), Sentra (05-05), X-Trail (04-13), Juke (15-17).
- Infiniti: FX35 (03-08), G35 (03-07), QX60 (16-20).
- Honda/Acura: Accord, MDX, RDX, TL.
- Other: Various Mazda, Ford, and other manufactures and models.
- Check your MAF, if it looks like this bolt pattern it should work.
